Guides, blogs, tutorials and more written by regular hobbyists - because in Warhammer sometimes enthusiasm is more important than skill!

Stripping Warhammer models the easy way – plastic & metal

Stripping Warhammer models doesn't have to be difficult. In this easy to follow guide we see how, without using brand-named products!

Our posts may sometimes contain affiliate links.

At some point in your hobby career there’s a good chance you’ll find yourself stripping Warhammer models down to repaint, whether they be old paintjobs you want to redo, failed test models or eBay rescues in need of a fresh start.

Over the years I have managed to collect far too many a perfectly acceptable number of classic models, but some time ago discovered that clear information on stripping them was surprisingly difficult to find. Where they could be found many of the guides available used products you can’t buy where I live and some also recommend using chemicals that are seriously dangerous, which isn’t really what I want to be doing!

So I did a little research and ended up writing this guide based on chemicals I found that meet six criteria:

  1. they are strong enough to remove paint
  2. they won’t damage your models
  3. they are easily available in most places (this means no brand names!)
  4. they are reasonably inexpensive (a paint stripper is no good if it costs a fortune)
  5. they are reusable
  6. they are safe to use (as much as possible)

Note: this guide does not currently cover resin miniatures, and trying to follow either section to strip resin can/will result in damaged models. For now if you’re trying to strip resin I would recommend looking at @Lovecraft0110‘s topic here. If you have any chemical suggestions for Forgeworld/Finecast/etc that meet the above criteria then please let me know!

It might look a little long, but I’ve tried to cover as much as I can – you may find that some sections aren’t as relevant to you as others. Have a read through of the whole thing before you start buying or attempting anything though. The equipment list looks similar for both plastic and metal models, but pay attention to the storage requirements! And before you start, cover your surfaces properly. I was working on top of paper towels, but still took the print off my cutting mat – I hate to think what it would have done to a table or worktop!

Stripping Warhammer models - dangerous to cutting mats!

Stripping Warhammer models – plastic

Okay, let’s talk about how to strip plastic miniatures!

Equipment list

99.9% isopropyl alcohol (also known as IPA or isopropanol)
This stuff is brilliant! It also seems to be the reason that Dettol, Simple Green (US) etc work. Don’t let your Librarians find out about it, because I think it might be some kind of sorcery!
The brand, packaging and intended use doesn’t matter so long as the purity is 99%+
I’ve used IPA before that was actually meant for removing fake nails – the colouring agent it contained wasn’t an issue.
I get mine from here, and despite fluctuating prices have never paid more than about £10/litre.
As a little bonus, you don’t need to clean this stuff off your models, as it evaporates completely – they use it in labs to clean equipment for that very reason!

A suitable container
Use one that’s completely airtight so that you don’t lose any IPA to evaporation while it’s stored. Think tupperware or similar, and big enough for the models you want to strip (make sure you’ll be able to fill it enough to cover your models – if you only have 500ml of IPA and one model to strip don’t use a wide 3 litre tub!)

A toothbrush
New, old, whatever. Stiff bristles. Just don’t brush your teeth with it when we’re done!

Wooden toothpicks
Or something similarly pointy, but not too sharp.

Paper towels

Protective equipment
What we’re doing is fairly safe, but you still need to be careful. Breathing in these chemicals isn’t good for you and they evaporate quite quickly. Make sure you have proper ventilation! If you can get one a proper mask that will protect from vapours is also good, but ventilation is key. Similarly getting this stuff in your mouth or especially eyes isn’t going to be fun. You’ll find it much harder to paint if you lose your eyesight, so don’t be silly here! Lastly suitable gloves (marigolds are always solid, latex or nitrile are also perfectly fine) are recommended to stop your skin drying out or being damaged. Those of you that use alcohol-based sanitiser regularly will probably already know how dry your hands can get!
Oh, and don’t smoke near where you’re working. Many chemicals (including what we’ll be using) can be lit just from their vapours. Again, VENTILATION!

For our younger readers you might want to commandeer an adult to give you a hand. Seriously.

Now on to…

Mostly drinking tea! ☕

Once you’ve checked off all the above, find some models to strip!

Plastic Dark Angels Sergeant

For this guide I’m using a Dark Angels sergeant I acquired from eBay. As you can see there’s a layer of black primer and one of dark green. Nothing too thick, but it will serve our purposes perfectly well.

The first thing to do is put your models in your container, fill with isopropyl alcohol until fully submerged, and seal tight.

Now go and put the kettle on and come back another day. Yes, really! This stuff can work in just minutes, but I like to put them in and just come back whenever I have time. The iso won’t do any damage, don’t worry – you can leave plastic in it for literally years and it’ll be fine. Trust me, I’ve done it!

Time is actually your friend here – the longer you leave your models to soak, the easier the next step will be. Speaking of which, let’s move on to…

Initial scrubbing!

Once we’ve left the alcohol to do its job we can get to scrubbing. Use your toothbrush, and don’t worry too much about being gentle – your models are tougher than you think! Just keep your brush and model wet with alcohol and take care around obviously thin or delicate bits to make sure you don’t bend or snap them.

This is the result of just a couple of seconds brushing. Not bad eh?

Partially cleaned plastic Dark Angels Sergeant

As you can see above this stuff will take off paint without damaging the plastic parts of your model. The below picture has been included to show that IPA can quickly get rid of the multiple thicker layers of paint you might encounter.

Partially cleaned metal Dark Angel

As a note, polystyrene cement (or ‘plastic glue’) isn’t affected by this stuff, so the bonds between the pieces of the model won’t weaken at all (more info on poly cement here)

So, now we’ve had a good scrub we should hopefully have made quite a dent in the paintjob. There’s a good chance that there will be some (or even quite a lot!) left however.
All manner of things can affect how easily the paint comes away: what brand of undercoat or paints were used, the thickness of the paint or the number of layers, whether the model was sealed with varnish…
So what do we do? Firstly have a look in the little nooks and crannies. If they’re still full of paint then jump in with your toothpick and see if you can’t clean them out a little. By using something like a toothpick we can gently remove paint without a sharp point potentially damaging any details.
Then get your model or brush head back in the tub. Getting rid of paint can take a little time, patience and elbow grease, so after applying more alcohol we can move on to…

Further scrubbing!

Yay, more scrubbing! 🎉

Basically, do again what you’ve already done, after another soak if you wish. Repeatedly if you really have to. Get rid of as much paint as you can before moving on to the following step.

You’re finished!

(or “when it’s okay to give up”)

So how long do we scrub for? Either until the model is clean, or until it can’t be cleaned any more.

If your model is nothing but plastic then congratulations, you win!

Stripped Dark Angels Sergeant

You may however find that while it looks and feels like the paint is gone, there is still colour on the plastic. This is perfectly acceptable, so long as there’s no loss of detail, and undercoating isn’t going to leave you with a horrible blob. Sometimes the plastic can end up looking slightly stained by the paint and there’s nothing you can do but cover it with a nice new paintjob!*

* this guide is purely for removing paint, if you want to actually apply it then there’s better people to ask than me!

Stripping Warhammer models – metal

And now we’ll talk about how to strip metal miniatures!

Equipment list

99-100% pure acetone
This stuff is nasty, but brilliant. It doesn’t play nicely with plastic however, so be careful. As with IPA in the plastic section of the guide, it doesn’t matter what kind you get, just make sure it’s pure.
If you’ve ever tried stripping models in nail polish remover, this stuff is probably why it worked (or too low a concentration of this stuff might be why it didn’t!)
I usually get mine from Amazon.

A suitable container
Acetone is difficult to store, because it can eat through many kinds of plastic. You want to be using LDPE (low density polyethylene) for short storage, but ideally glass or metal. Make sure you don’t have lid seals the acetone might damage (silicone, for example). And lastly, try not to let it get too hot and don’t be shaking it about to stop pressure building up. Whatever you choose, make sure you can fill it enough to cover your models – if you only have 500ml of acetone and one model to strip don’t use a 3 litre container!
For this guide I’m using a jar that previously contained pickled onions – it was only £1 and I don’t like them anyway! Worth noting is that I don’t know what the plastic seal in the lid is made out of, but I won’t be using this for long-term storage – the onion smell never goes away!

A toothbrush
New, old, whatever. Stiff bristles. Just don’t brush your teeth with it when we’re done!

Wooden toothpicks
Or something similarly pointy, but not too sharp.

Paper towels

Tweezers
Ideally long-nosed, and I prefer reverse-action so that I don’t have to continuously grip them.

Protective equipment
What we’re doing is fairly safe, but you still need to be careful. Breathing in these chemicals isn’t good for you, even though they evaporate quite quickly. Make sure you have proper ventilation! If you can get one a proper mask that will protect from vapours is also good, but ventilation is key. Similarly getting this stuff in your mouth or especially eyes isn’t going to be fun. You’ll find it much harder to paint if you lose your eyesight, so don’t be silly here! Lastly suitable gloves (latex will give about 10 minutes of protection, nitrile almost none, but acetone will get through pretty much all rubber gloves pretty quickly) are recommended to stop your skin drying out or being damaged. Acetone shouldn’t be handled directly – it can cause damage very quickly!
Oh, and don’t smoke near where you’re working. Many chemicals (including what we’ll be using) can very easily be lit just from their vapours. Again, VENTILATION!

For our younger readers you might want to commandeer an adult to give you a hand. Seriously.

Now, on to…

Mostly drinking tea! ☕

Once you’ve checked off all the above, find some models to strip!

For this guide I will be using the terminator above. An eBay rescue, you can see that there’s multiple layers of paint thick enough to obscure the details, and it desperately needs some love! (if the person who sold these is reading, I’m sorry!)

Now before you do anything, make sure there’s no plastic on the model. Remove bases/backpacks etc if necessary. Acetone will turn plastic to sludge, and we don’t want that! If you have plastic parts you can’t remove, head back to the table of contents and find the guide on mixed metal/plastic stripping.

Now we know we’re only dealing with metal you can put your model/s in your container. Fill with acetone until fully submerged, and seal tight.

At this point I think you’ve earned a break, so go and put the kettle on and come back another day. No, honestly! This stuff can work in just minutes, but I like to leave it and just come back whenever I have time. The acetone won’t do any damage, don’t worry – you can leave metal models in it for literally years and they’ll be fine. Trust me, I’ve done it!

Time is actually your friend here – the longer you leave your models to soak, the easier the next step will be.

As a little aside, this picture was taken ~15 minutes after the acetone was added to my jar. It was clear to begin with!
https://i.imgur.com/HcIgieX.jpg
When I came back to take the models out you couldn’t see into it!

And then, another day…

The first scrubbing!

Once we’ve left the acetone to do its job we can get to scrubbing. Remove the model from your container (your tweezers can come in handy here) and hold it using your tweezers – this minimises the need to touch it with your gloves, which reduces the likelihood of the acetone eating through them. Use your toothbrush to scrub, and don’t worry too much about being gentle – these metal models are solid. If I dropped this outside it would probably damage the concrete more than the Terminator!
Just keep the model wet with acetone, watch out for flimsy bits like banner poles and give it a scrub!

This is how our Terminator looked when I pulled him out. He looks all puffy because the layers of paint are that thick they’re simply falling off!

Puffy metal Terminator

A light touch with the brush and it’s peeling away beautifully! Told you this stuff was brilliant – several layers of paint gone in moments! Around the back the paint came off almost in one, and even kept its shape!

Acetone has the added benefit of completely getting rid of super glue for us too, so we can properly clean and then reassemble our models. For difficult to access joins a little pressure might be required, or cleaning paint from the join to let the acetone in, but it will do the job!

So, now we’ve had a good scrub we should hopefully have made quite a dent in the paintjob. There’s a chance that there will be some (or even quite a lot!) left however. Not all models will clean up as easily as this, and when you scrub it may almost look like you’re giving the model a silver drybrush as the paint comes off.
All manner of things can affect how easily the paint comes away: what brand of undercoat or paints were used, the thickness of the paint or the number of layers, whether the model was sealed with varnish…
So what do we do? Firstly have a look in the little nooks and crannies. If they’re still full of paint then jump in with your toothpick and see if you can’t clean them out a little. By using something like a toothpick we can remove paint without a sharp point potentially damaging the surfaces of the model.
Then get your model or brush head back in the tub. Getting rid of paint can take a little time, patience and elbow grease, so after applying more acetone we can move on to…

Further scrubbing!

Yay, more scrubbing! 🎉

Basically, do again what you’ve already done, after another soak if you wish. Repeatedly if you really have to. Get rid of as much paint as you can before moving on to the following step.

You’re finished!

(or “when it’s okay to give up”)

So how long do we scrub for? Either until the model is clean, or until it can’t be cleaned any more.

If your model is nothing but shiny metal then congratulations, you win!

Stripped metal Terminator

You may however find that while it looks and feels like the paint is gone, there is still colour on the metal. This is perfectly acceptable, so long as there’s no loss of detail, and undercoating isn’t going to leave you with a horrible blob. Sometimes it can seem like the metal has been slightly stained by the paint (I find this more common in very old models) and there’s nothing you can do but cover it with a nice new paintjob!*

Before you do so however, I would recommend giving it quick bath. Acetone can leave a slight residue on the model, which isn’t ideal for priming on top of. A quick wash in 99.9% isopropyl alcohol will fix that however. If you’ve read the plastic or mixed metal/plastic sections of this guide then you probably already have some in a container!

* this guide is purely for removing paint, if you want to actually apply it then there’s better people to ask than me!

Mixed plastic and metal models

This section is less a guide in its own right, and more a combination of the last two.

Sometimes you’ll find yourself with a model made from both metal and plastic components. In this case, neither acetone or isopropyl alcohol (the two chemicals we’re using, if you haven’t yet read the rest of this guide) are best for cleaning the whole model.
The plastic components will melt in acetone, so we need to use IPA, but this will weaken the super glue bonds that were (hopefully) used to join the metal components, which are better cleaned in acetone anyway.

The plan, therefore, is to start as though you were stripping a plastic model. By the time you get to the ‘initial scrubbing’ stage (don’t worry about scrubbing yet!) of the plastic guide the superglue holding the pieces together should be nice and weak. I’ve found that sometimes it goes brittle, sometimes sticky, but either is easier to work with. A little bit of pressure should take the metal components off quite easily, allowing you to strip the plastic and metal components separately using their respective sections of the guide.
If the metal pieces won’t come away, remove any paint surrounding the join, re-soak your model and try again now the alcohol has had more time to work.

The super glue that remains on the plastic section of the model will hopefully be nice and soft, and come away with your paint. If however it remains stubborn then rubbing very carefully with a very small amount of acetone on a cotton bud (or Q-tip for our American friends) should help get rid of it. Be careful here, as the acetone can and will damage the plastic on your model – we only want to get rid of the glue!

Once all your pieces are separate you can get to the real task at hand using the rest of this guide. Good luck!

FAQ

“How do I dispose of leftover chemicals?”

My first answer is “don’t”! So long as you’re using an airtight container and store them out of direct sunlight (acetone in particular doesn’t like being heated up that much, and doing so can cause a pressure build up) then you can simply save them until you next have something to strip. When they start to get murky just pass them through a sheet of coffee filter paper to get rid of all the loose paint.

If however you’ve gotten to a point where the chemicals can’t be redeemed then maybe it’s time to start from fresh.
The process for this is actually very easy – both ISO and acetone will kindly evaporate if you leave them open! Simply open your container and leave it somewhere safe and secure outside (away from children, pets or wildlife!), and wait until nothing is left. If there is paint/glue residue that’s solidified inside the container simply use your cleaning chemicals and some paper towel to get rid of them, and your container should be good as new.
(For acetone once it’s evaporated I prefer to simply dispose of the glass jar and get a fresh one, as there’s usually one to hand and it’s easier than cleaning them out)

“Why use different chemicals for plastic and metal models?”

When finding the chemicals for this guide I had several criteria to meet, as detailed in the opening post. Acetone and isopropyl alcohol both fit the requirements for one, but not both, model materials.

Acetone is very good at removing paint (and super glue!), and won’t damage metal, which makes it perfect for your older pewter models. It will, however, damage plastic, so make sure you take plastic bases off if you don’t want them melting to your models!

Isopropyl alcohol is strong enough to remove paint (and weaken super glue, too), but even with extended exposure won’t have any effect on plastic. You can use it to strip metal models too, but you’ll have a much easier time if you use acetone.

Both of these chemicals can damage resin models however, so please do not use them on Forgeworld, Finecast or any other models with resin components – and if you do don’t blame me if it goes wrong! This guide will be updated with a resin section if and when I can find a chemical that suits the criteria – if you have any suggestions here feel free to leave a comment!

“Can I use chemicals at lower concentrations?”

You may find that under the kitchen sink you’ve got a bottle of 70% IPA hand sanitiser or some 90% acetone nail polish remover in the bathroom. Technically you can use these, but your results simply won’t be as good as they would be if you used purer chemicals because the remaining percentage is made up of stuff that doesn’t help us strip paint. Both ISO and acetone are cheap to buy, so for best results go pure.

“Have you considered X product/chemical?”

Maybe, it depends on what you’re thinking of!

Cellulose/lacquer thinners are a common suggestion for metal models – the reason I decided on pure acetone (often a major component of lacquer thinner) is that it’s simple and reliable. Cellulose thinners can have a variety of different chemical compositions which can lead to a variety of different results, sometimes better, sometimes worse. Older thinners (manufactured before newer low-VOC regulations) can also be significantly more dangerous to handle or be around than acetone. Acetone is simply acetone, and should always behave the same.

When it comes to actual products, the majority are instantly out of the running due to the ‘availability’ criteria. At some point in the future I would like to do a head-to-head comparison of various products (both for the home and for hobby stripping), but if I ever do that will be a totally different post!

pawl
pawlhttps://thewarpstorm.com
pawl has been an on/off hobbyist since the late nineties but still possesses significantly more enthusiasm for the hobby as a whole than skill with a brush, and so is always on the hunt for fast, easy and lazy techniques that give good results. Despite this he sometimes still attempts to paint Space Marine helmet lenses, and occasionally even manages to stay within the lines!

Related Articles

Subscribe
Notify of
0 Comments
Inline feedbacks
View all comments

Support us

spot_img

Latest Articles

0
We would love to know your thoughts, please comment below! 🙂x
()
x